Hot Stamp Decorator Line

This 9-head 3-up Hot Stamping Decorating Line uses a cam-driven inline walking beam design for full-time 3-shift fully-automated operation with minimal operator intervention and maintenance. Undecorated parts are loaded into a bucket elevator on one end and decorated parts are counted into boxes at the other.  A carton indexer allows continuous multi-box operation.  This system contains a vision system for Print Quality Verification (PQV) inspection.

Filling Line

This Tube Filling Line is designed with a precision recirculating nest transported by a cam-driven walking beam mechanism and a lower return conveyor.  Nests are easily replaceable for easy conversion to other sizes.  Various loading and unloading mechanisms are available to suit the application.  One operator can easily run multiple lines at the same time.  Bulk melting, storage, and transport are also compliments to this line.  Temperatures are monitored and recorded on a chart recorder.

Pad Print Decorator Line

This 2-head 1-up Pad Print Decorating Line uses a cam-driven inline walking beam design for full-time 3-shift fully-automated operation with minimal operator intervention and maintenance. Undecorated parts are loaded into a bucket elevator on one end and decorated parts are counted into boxes at the other.  A carton indexer allows continuous multi-box operation.  This system contains a vision system for Print Quality Verification (PQV) inspection.

Cosmetic Tube 3-piece Assembler 

This 3-Piece Tube Assembly Machine utilizes a "paddlewheel" rotary dial for access to both sides of the tube. One piece is inserted and held in one end and another piece is inserted and turned.  Multiple stations are used to allow time for assembly.  A LVDT (Linear Variable Differential Transformer) is used to measure the dimension of the assembly to thousandths of an inch.  An acceptance window can be established and assemblies outside the window are rejected.  A part counter counts the parts into a box.

Cosmetic Tube   2-piece Assembler 

This 2-Piece Tube Assembly Machine utilizes a rotary dial and a placing tool to assemble a 3-piece tube assembly into sleeve.   A LVDT (Linear Variable Differential Transformer) is used to measure the dimension of the assembly to thousandths of an inch.  An acceptance window can be established and assemblies outside the window are rejected.  A part counter counts the parts into a box.

Hot Melt Glue Liner

This Hot Melt Glue Liner applies hot melt to plastic parts in the annular groove used to seal to a bottle.  Parts are conveyed directly from the molding press to the centrifugal disc feeder.  The parts are oriented hot melt groove up and transported under the hot melt gun by a dial.  The hot melt station spins the part to distribute the hot melt evenly.  A sensor is used to determine if hot melt is in the part.  A "no hot melt" part is physically extracted from the good part stream.  This machine is built for continuous use with minimal maintenance. A carton indexer allows continuous multi-box operation.